Follow the instructions within this manual to remove your factory radio. Once removed, proceed with the navigation radio installation. Refer to our Yo
2BuickEnclave ... 2008-2012Lucerne ... 2006-2011ChevroletAvalanche ...
3Dash Disassembly(Figure B)(Figure A)1. Unclip and remove the trim panel around radio andA/C control. (Figure A)2. Remove (6) 9/32” screws to extract
4Dash Disassembly1. Remove (2) 10 mm bolts from below knee bolster under steeringcolumn and remove panel.2. Remove (2) 10 mm bolts from panel below pa
5Dash Disassembly(Figure C), then using the panel removal tool unsnap the shifter trim panel. Unplug and remove the panel. (Figure D)4. Using a panel
6Dash Disassembly1. Unclip the radio trim panel including the climate controls. 2. Unplug the climate controls and remove the panel.3. Remove (4) 9/32
7Dash Disassembly1. Unclip and remove the trim panel on top of theradio trim panel. (Figure A)2. Remove (2) Phillips screws exposed under panelprevio
Komentáře k této Příručce