Chevrolet 2006 impala Specifikace stáhnout pdf (Strana 270)

100

101

Wait at least 30 minutes before checking the transaxle

ﬂuid level if you have been driving:

• When outside temperatures are above 90°F (32°C).

• At high speed for quite a while.

• In heavy traffic — especially in hot weather.

• While pulling a trailer.

To get the right reading, the ﬂuid should be at

normal operating temperature, which is 180°F to

200°F (82°C to 93°C).

Get the vehicle warmed up by driving about 15 miles

(24 km) when outside temperatures are above

50°F (10°C). If it is colder than 50°F (10°C), you

may have to drive longer.

Checking the Fluid Level

Prepare your vehicle as follows:

1. Park your vehicle on a level place. Keep the

engine running.

2. With the parking brake applied, place the shift lever

in PARK (P).

3. With your foot on the brake pedal, move the shift

lever through each gear range, pausing for about

three seconds in each range. Then, position

the shift lever in PARK (P).

4. Let the engine run at idle for three to ﬁve minutes.

Then, without shutting off the engine, follow

these steps:

1. Pull out the dipstick and wipe it with a clean rag or

paper towel.

The transaxle ﬂuid dipstick

handle is the black loop

with this symbol on it. It is

located near the rear of

the engine compartment.

See Engine Compartment Overview on page 5-12

for more information on location.

2. Push it back in all the way, wait three seconds and

then pull it back out again.

5-24

1 2 ... 265 266 267 268 269 270 271 272 273 274 275 ... 389 390

Komentáře k této Příručce

Žádné komentáře

Chevrolet 2006 impala Specifikace Strana 270

Komentáře k této Příručce